EasyPro - Pressurized Bead filter - 3600 Gallon Model - 1-1/2" Valve - PBF3600

Easypro Pressurized Bead Filter - Commercial Grade Filtration specifically designed for use with water gardens, koi ponds and hybrid ponds, EasyPro pressurized bead filters offer superior mechanical and biological filtration for clean, clear water. Beneficial bacteria colonize on the surface of the Ultimate Tube Media used in these filters. Beneficial bacteria help break down fish toxic ammonia and create a healthier environment for aquatic life. A properly sized and installed filter will provide excellent water quality for maximum pond enjoyment!

Mechanical and biological filtration for water gardens, koi ponds, hybrid ponds and fish systems

• Strong, heavy duty, polyethylene filter body
• Simple to set up and assemble
• Easy back flush – uses six position control head
• Includes Ultimate Tube Media for maximum filtration and minimal back pressure
• Includes Pressure Gauge to monitor filtering and know when to backwash
• Minimal back pressure – high flow rate media creates very little back pressure
• Back flush waste line has clear section to easily monitor cleaning cycle
• 1-1/2″ inlet/outlet lines with unions -  included free for plumbing lines

Specifications

• Model # - PBF3600
• Maximum Flow Rate: 50 gpm (3000 gph)
• Maximum recommended pond size: 3600 gallons
• Approximate dimensions: 19" diameter x 36" tall
• Inlet: 1-1/2"
• Outlet: 1-1/2"
• Max Operating Pressure Rating: 35 PSI
• Warranty: Three (3) Year Limited Manufacturer's Warranty
• Instruction manual .PDF

Note 1: Height is measured from floor to top of handle. **Diameter measurement is tank only, control valve not included.

Higher flow rates are possible but filter effectiveness is reduced.

A valved bypass can always be used to allow water to be bypassed from a stronger pump


Note 2: Pump is required for use. Typically you would use an external pump which will be stronger to stir up the media for a proper backwash.