10 Watt UV Clarifier/Sterilizer - In or Out of Pond Use - 18ft Cord - 3/4, 1 and 1-1/2in In/Out - 02910
Product Details
- Manufacturer's Part # 02910
- For in or out of water use
- Maximum submerged pressure rating - 5 psi
- Standard 120 Volts / 60hZ - 0.20 amps
- Unit's vortex flow design exposes water longer to ultraviolet light
- Glowing monitor halo ringTM, visible from any angle immediately shows it's working
- All materials used are rugged, uv resistant and suitable for outdoor use.
- Suitable for most ponds up to 1500 gallons (less with full sun)
- Using pump flows up to 700 GPH (gallons per hour)
- Approximate dimensions assembled: 12-5/8" x 3-1/4"
- 3/4", 1", and 1-1/2" Step down Barbed Intake and Discharge with 1-1/2" mpt connections on the body
- 1 Year limited manufacturers warranty (lamp and quartz sleeve excluded)
- Manufacturer's Instruction Manual .PDF
What comes in the box:
- Pondmaster 10 Watt UV Unit Body with 2 x 3/4 - 1-1/2" Fittings
- 10 Watt UV Lamp
- Quartz Sleeve
- Transformer / Ballast with 18ft grounded power cord
- Two (2) 3/4" 1" and 1-1/2" Barbed Fittings
- Instructions
Special UV Warning: Avoid exposure to direct or strongly reflected germicidal ultraviolet rays. Germicidal ultraviolet rays are harmful to the eyes and skin. Always turn off power before handling or servicing the unit. Never look directly at the bulb rays. As with all UV lamps, never touch with bare hands. Always use gloves or a towel.