Tsurumi - LSC1.4S - Contractor Series Submersible Pump - 2/3hp - 3/4" Discharge - 115V - 20ft Cord
Product Details
The Tsurumi Low Level Manual Electric Submersible Pump are known as original residue dewatering pumps. They are able to pump down to the floor, even the smallest puddle can be pumped dry.
LSC drainage pump are the best for complete drainage of flat surfaces where a sump is not available. Ideal for decorative waterfalls and fountains, residential, commercial, industrial residual drainage and has Basement sump pump where a sump is not required.
Features:
- Semi-open, Ductile Iron impeller with replaceable, adjustable wearplate and built in check valve allows for residual water removal down to 0.04” of an inch.
- Double inside mechanical seals with silicon carbide faces, running in an oil filled chamber and further protected by a lip seal running against a replaceable, 403 stainless steel shaft sleeve, provides for the most durable seal design available
- Highly efficient, continuous duty, air filled, copper wound motor with class E insulation minimizes the cost of operation
- Built in thermal and amperage sensing protector prevents motor failure due to overloading or accidental run-dry conditions.
- Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours extend operational life.
- Top discharge, flow-thru design enables operation at low water levels for extended periods.
- 2 Year Manufacturer's Warranty.
Product Specifications
Liquid Type:
- Cleaning Water, Water on Floor, Puddles, Residual Water.
- Max. Water temperature: 140° F - 40°C
- Impeller: Semi-Vortex Type
- Double Mechanical Shaft Seal
- Shielded Ball Bearing
- Dry Submersible Induction Motor, 2 Pole
- Insulation class E
- Built-in Miniature Protector
- Lubricated with Turbine Oil VG32 (non-additive)
Pump:
Motor:
Details
Brand Name: Tsurumi
Model #: LSC1.4S
Pump Type: Submersible Residue Dewatering Pump
Max Pump Flow: 948 GPH
Horse Power: 2/3 HP
Discharge Size: 3/4" NPT
Power: 115V / 60 Hz
Amperage: 10.5 A
Phase: Single
Power Cable Lenght: 20 ft
Max Head Height: 39 ft Aprox.
Min. Operating Water Level: 1/25" or 0.04"
Aprox. Dimensions: 7 11/16" Dia. x 12 7/16" H
Aprox. Pump Weight: 29 lbs
2 Years Limited Manufacturer Warranty
Reference Material
Products Specification (PDF)
Dimensional Drawing (PDF)
Operational Manual (PDF)