Product Details
All units (including Stainless Steel models) come fully equipped with control for all season temperature control demanded by professional fish keepers, breeders & hobbyists. Our highly sensitive flow switch, high limiting safety thermostat and integral contractor / relay are fitted as standard. The Titanium heaters are designed for safety and efficiency. They are easy to install with the option of water flow from either direction.
Key Features:
- 2kw (2000 Watts)
- 115 Volts AC (Power Cord Not Included)
- All Titanium flow Tube (Suitable for Freshwater or Saltwater)
- Titanium heating element
- Temperature Control
- External Reversible Flow Switch - Allows the water to flow through either direction
- High Limiting Safety Thermostat
- Control thermostat 0ºF to 90ºF with 1ºF differential
- 1-1/2" In and Out Slip Connections
- Approximate dimensions: 23" L x 6" W x 8.5" H
- Minimum flow requirement: 600 GPH
- Maximum flow velocity: 2560 GPH
- Integral Contactor / Relay
- Circuit Protection Delay Switching Minimum Pipe Size: 1 1/4"
- Unit must be mounted to a firm base or wall
- Unit should be installed within a dry weatherproof enclosure
- *** Minimum 25 AMP Dedicated Circuit Required ***
- See instructions included with the unit for installation instructions
- 1 Year limited manufacturer's warranty
Heater Operational Instructions
HTI - Pure Titanium Models | ||||||||
Model | KW | Volts | Phase | Amps | Length | Width | Height | Bolt "on Center" Width (in) |
HTI-1.5-115 | 1.5 | 115 | 1 | 13 | 23" | 6" | 8.5" | 12.5" |
HTI-2-115 | 2 | 115 | 1 | 17.4 | 23" | 6" | 8.5" | 12.5" |
HTI-2-220 | 2 | 220 | 1 | 9 | 23" | 6" | 8.5" | 12.5" |
HTI-3-220 | 3 | 220 | 1 | 13.6 | 23" | 6" | 8.5" | 12.5" |
HTI-4-220 | 4 | 220 | 1 | 18 | 23" | 6" | 8.5" | 12.5" |
HTI-6-220 | 6 | 220 | 1 | 27 | 23" | 6" | 8.5" | 16.5" |
HTI-6-220-3 | 6 | 220 | 3 | 24 | 27" | 6" | 8.5" | 16.5" |
HTI-8-220 | 8 | 220 | 1 | 36.4 | 27" | 6" | 8.5" | 16.5" |
HTI-8-220-3 | 8 | 220 | 3 | 33 | 27" | 6" | 8.5" | 16.5" |
FLOW RATE FOR ALL UNITS: Minimum: 10gpm Maximum: 43 gpm
Rule of thumb on pond heating: 1 Watt per Gallon = 10 degree rise in water temperature. Example 1500 watt (1.5 kw) to heat a 1000 gallon pond by 15 degrees over a 24 hour period.
Unit may vary from photo
NOTE: - Our warehouse collects sales tax in many states. We will contact you if you reside in one of the following states with the Sales tax amount prior to completing your order. Here are the states: Illinois, Pennsylvania, Wisconsin, Washington State, Michigan, Oklahoma, Massachusetts, Georgia, Maryland, Arizona, Minnesota, Colorado, Virginia, California, Hawaii, Louisiana, Washington, DC - Florida will automatically calculate in the checkout.